Classic hat rack with side ends in cast aluminum with round rods in untreated oak. 4 anchor hooks are included. The rods are 115 cm (45.3 in.) long but can easily be cut to the desired length. We recommend treating the wood with linseed oil or linseed oil wax to protect against moisture and stains. Screws for wall mounting are not included, as the length and type of screw need to be adapted to the wall material.
Mounting Instructions: Mark the screw holes at both ends of your dowel, then pre-drill a 15 mm (0.59 inches) deep hole with a 2 mm (0.08 inches) wide drill bit. Screw in the slot screw by hand with a screwdriver and stop when you feel it "tightens" in the screw and that it fits nicely in the countersunk hole. The screw should not be forced further down than necessary as it may break.
Width: 115 cm (45.3 in.)
Depth: 3 cm (1.18 in.)
Diameter of round rods: 25 mm (1 in.)
This hat rack is available in several designs. If you would like a design combination that is not shown on the website, please contact us for price information and to place an order.
